Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us
The current Kabete National Polytechnic has a rich history that dates back to 1924 when the colonial Government started it as a Native Industry Training Depot. Later it was converted to a recruiting barracks for soldiers during the 2nd World war (1939-1945). After the 2nd World war was over it was reverted into a school for 3 years Trade courses for primary levels (former Std 8). With time and the conversion to a new system of Education Kabete became a National Technical Secondary School with the purpose of admitting Std 7 pupils who excelled in their Std 7 National Exams during the 7-4-2-3 system of Education. During this time, the Institution used to admit to form I the best and outstanding performers inStd7 National Examinations from all over the Country. It also admitted students from what then used to be referred to as Grammar Secondary without technical background. These were admitted in form 3 and were expected to pursue while in that form other trade areas such as plumbing, electrical, mechanical etc. as a gateway to joining technical colleges.
Read more about this company
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have:-
- a Higher Degree in Mechanical Engineering (Production/Plant), Automotive Engineering, Agricultural Engineering, Medical Engineering, or equivalent and relevant qualifications from a recognized institution
- been registered by the relevant professional body (where applicable)
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have a Higher Diploma in any of the following disciplines: Food & Beverage, Catering & Accommodation, Tourism Management or equivalent and relevant qualifications from a recognized institution.
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have a Diploma/TVET-CDACC level 6/City & Guilds in any of the following fields: Hair & Beauty Therapy/Cosmetology or equivalent and relevant qualifications from a recognized institution.
Note: Pedagogy and Practical experience in the relevant niche area will be an added advantage
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
For appointment to this grade, a candidate must have a Degree in any of the following disciplines: Television and Radio Production, Mass Communications, Public Relations and Communication, English, Kiswahili, French, Germany, Journalism or equivalent and relevant qualifications from a recognized institution.
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
go to method of application »
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
Note: Pedagogy and Practical experience in the relevant niche area will be an added advantage
Duties and Responsibilities
Duties and responsibilities at this level will include:-
- undertaking training in areas of specialization in accordance with the syllabus;
- preparing teaching/learning materials and schemes of work;
- setting and marking examination/assignment;
- carrying out research work under the guidance and supervision of a senior trainer; and
- supervising trainees’ projects and practical work
Method of Application
Interested and qualified persons are requested to submit their applications directly to the institution where vacancies exist by filling ONE (1) PSC 2 (Revised 2016) application form and attaching copies of National ID card, academic and professional certificates, transcripts. So as to reach the respective Boards/Councils on or before 17th April 2023 (Latest 5. 00p.m East African Time).
Interested and qualified? Go to
Kabete National Polytechnic on to apply
Build your CV for free. Download in different templates.